Off-Grid Power Strip Hyper
Multiple connections
Change one socket in three, so that multiple devices can be used simultaneously. With three power outlets, two USB-C and one USB-A, the Hyper off-grid power strip can power a range of essential devices and devices support up to 1200W. The display shows the USB output power in real time.
Hyper 2000 for emergency power supply
The off-grid power strip has multiple European standard sockets and USB ports and delivers up to 1200W* power for essential devices during a power outage.
* Make sure the total load does not exceed 1200W.
Installation Guide Video
The maximum supported power is 1200W. Make sure that the total load of the Off-Grid socket outlet connected electrical appliances do not exceed 1200W.
When the Off-Grid power strip is connected to Hyper 2000, Hyper 2000 will automatically operate in the Off-Grid mode.
It is not waterproof, so do not expose it to high humidity, rain or other conditions where it may get wet.
Yes, the Zendure app can connect to the Off-Grid power strip via Wi-Fi and Bluetooth and operate these.
The power strip has two Off-Grid modes: Regular and Eco
In Regular mode, the Hyper 2000 remains in standby/working status even when not in use. is used so that it is always ready to supply power.
Eco mode reduces standby power consumption by completely shutting down the Hyper 2000. switch after two hours in standby. After switching off, the power strip can be activated again are activated by holding the button for 2 seconds.
No, the Hyper 2000 can only operate in grid-tied or off-grid mode, not both at the same time.
Hyper 2000 Further
Information
Off-Grid Connectivity Further
Information